Table of Contents
Advertisement
C
O
M
M
E
R
C
Diagram 9
Raise the
incline.
Side rail
Incline lift
QUICKSTART
key
Important: With the handrails attached, the width of the treadmill is 33½
inches (85 cm). It will not fit through a standard 32-inch doorway.
10. Prepare the unit for handrail installation. Diagram 9. For an easier installation,
raise the incline to its maximum height by taking the following steps:
a. Plug the treadmill into a power outlet and turn the unit ON.
b. Stand to the side of the treadmill and press QUICKSTART (see inset).
After a few seconds, the running belt begins moving.
c. Press the INCLINE ▲ key until the display shows an incline of 15 percent.
d. Once the lift stops moving and the display indicates 15 percent, press
the Stop (red) button and turn power switch OFF.
Diagram 10
Remove the
lower handrail
clamp.
Lower handrail
clamp
Loosen and
remove the four
handrail clamp
screws.
11. Remove the lower handrail clamp. Diagram 10. To prepare the unit for
handrail installation, remove the four fasteners securing the lower handrail
clamp. Use the hex key provided.
I
A
L
P
R
O
D
TM
U
C
T
S
D
I
V
I
S
I
O
N
page 15
Hide quick links:
Advertisement
Table of Contents
