d. It will then settle on around .800 amps (800 Milliamps) for a while.
e. Then it may drop to .100 to .200 amps (100 to 200 Milliamps) for period of time.
f. Finally it will drop all the way into sleep mode, .040 to .100 amps (40 to 100 Milliamps) and will
stay there until the van is woke up.
g. Note: The values you will see will vary from van to van, from van type to type and by the number
and type of accessories installed on the van. The important thing is that it drops to a value less
the 100 Milliamps (.100 Amps) for a standard Van when it goes into sleep mode.
15) You can wake the van simply by opening the drivers side door for a few seconds, then closing it.
16) Watch the meter again to see the van go into sleep mode again. You should repeat this test until you are
satisfied the van's "Sleep Mode" is functioning correctly.
Battery Information - raw Test Procedure
Page 8