Plaques Installation - Huffy Coaster Owner's Manual

Plaques Installation (various models)
VIEW 1: Bracket Mount:
• Attach Plaque
B using supplied Clamps
D .
• Tighten Screws so that the Plaque does not
move.
• Do not over-tighten Screws. This may dam-
age the Plaque.
VIEW 2: Zip-Tie Mount:
• Position Plaque against Handlebar.
• Attached with supplied Zip-Ties. Do not
over tighten, this can break the Zip-Ties.
NOTE: Plaques may mount with 2 or more
Zip-Ties.
VIEW 3: Hook and Loop Mount:
• Open the straps on the Plaque and wrap
them around the Handlebar or Brace
• If Handlebar Pad is in place, wrap straps
around the Handlebar Pad.
• Make sure the straps are secure.
WARNING:
• Ensure Plaque does not interfere with child's
visibility or ability to control the product.
• Make sure front Refl ectors are not blocked
by Plaque.
Bells and Features:
• If the mounting Screw
stalled, remove it and set aside.
• Open the Clamp
the handlebar.
• Position the Bell / Accessory so that is
level and positioned as shown.
• Tighten Screw securely. Do not over-
tighten. This can damage the Clamp.
24
A
to Handlebar Cross Brace
C and Screws
A
is factory in-
B
just enough to fi t on
1
C
D
2
B .
3
B
A
B
B
A