Advertisement
TO FASTEN RESTRAINT
1
SYSTEM:
Step 1.
Place child in the seat.
Position restraint system between
legs.
Step 2.
To fasten restraint system
buckle, push buckles together as
shown.
Step 3.
To adjust restraint
system, loosen or tighten loop of
restraint to fit snugly around child's
waist.
Step 4.
To unsnap restraint
system buckle – press tabs.
When child is able to climb in and out
of the chair unassisted, you may store
the restraint system behind the seat.
Insert restraint through small slot in
the seat pad.
Secure both fasteners of restraint to
backside of rocker as shown.
NEWBORN ROCKER USE
2
POSITION:
Adjust rocker into the fully support-
ed recline position.
To adjust seat position, pull up on
wire lever and adjust seat back until it
is fully reclined and locks into place.
NOTE:
Use head rest until child
can hold their head up unassisted.
IMPORTANT! Use the upright Toddler
position only when child can sit up
unassisted!
How to Properly Use Your New Rocker
Newborn Position
4
R02J-A 3/03
Advertisement
