Mounting Instruction Plate - mcmurdo E3 Owner's Manual

6.3 Mounting instruction plate

The E3 is supplied with an instruction plate. This is a rigid plate with basic visual
instructions for how to operate the E3 in an emergency. The plate varies slightly
depending on whether you have a wall bracket or a full enclosure. The wall bracket
version is illustrated below.
58.4mm (2.3")
sos
1
Mount plate
next to EPIRB
2
3
130mm
116.3mm
(5.1")
(4.58")
4
5
70mm (2.75")
The instruction plate should be mounted next to the EPIRB so that it is easily visible
in an emergency. Use the four self-tapping screws supplied to mount the plate.
Mounting dimensions are shown in the diagram above, or you can use the plate
itself at a drilling guide for the screws.
During vessel maintenance, ensure the plate does not get painted over or cleaned
down with strong degreasing solvents.
11