Network Turret Camera·Quick Start Guide
2.2.2 Pendant Mounting
The pendant mounting bracket is not included in the package. You
need to prepare one in advance, if you adopt this mounting type.
Steps:
1.
Mark the screw holes on desired mounting place.
2.
Drill three screw holes for expansion bolts.
3.
Route the cables and fix the pendant mounting bracket to
ceiling.
4.
Disassemble the camera.
Refer to step 1 in ceiling mounting of each camera type.
5.
Fix the mounting base to the cap of the pendant mounting
bracket with 3 supplied self-tapping screws.
Cables
Fix Pendant Mount
Figure 2-33
33