Type Iii - SAB SabVision 2300 Quick Start Manual

Network Turret Camera·Quick Start Guide

2.1.3 Type III

Steps:
1. Disassemble the camera.
Rotate the trim ring anticlockwise to take it off from the
1).
camera.
Rotate the mounting base anticlockwise to take it off from the
2).
camera.
Separate the camera and the enclosure.
3).
Trim Ring
①
②
Mounting Base
2. Install the memory card.
Find the Micro SD/RST cover on the side of the camera.
1).
Figure 2-15 Disassemble the Camera
Micro SD/RST
Cover
Figure 2-16 Micro SD/RST Cover
③
23
Enclosure
Camera