Cleaning The Dust Bin - LG VS8417SCW Owner's Manual

Dust bin
release button
①
Dust bin
Clean and dry
① To detach the dust bin, push and hold the
release button and pull it in the direction
shown.
② Remove the filter cover assembly in the
direction indicated by the arrow, then
remove the dust separator from the dust
separator.
(Beware that the dust that may fall from
the filter in the process.)
③ Empty the dust bin.
④ Separate the inner filter from the filter
cover as shown in Fig.1.
⑤ Rinse the detached filter under water until
the water runs clear. Set the filter in the
shade until completely dry.
(Do not use hot water or detergent. They
may cause deformation to the filter.)

CLEANING THE DUST BIN

②
Inner filter
(non mesh side)
⑤
Turn off the vacuum cleaner and remove battery
before servicing to avoid risk of electrical shock or
injury.
Helpful tip
• To maintain the vacuum cleaner, clean the filter
once a week with a cleaning brush or using
another vacuum cleaner, and at least twice a
month with water.
(Frequent cleaning of the filter can help maintain
its performance.)
• To maintain the best performance of your vacuum
cleaner, empty the dust bin after every use.
• After cleaning the dust separator, be sure to put it
back into the dust bin.
• The dust separator must be in place before
using the vacuum cleaner. Without it, dust will be
sucked into the main body and motor, causing a
malfunction and damage to the vacuum cleaner.
Filter cover
Inner filter
Dust separator
④
WARNING
③
Fig.1
15