Related Manuals for Koganei ORV16
Summary of Contents for Koganei ORV16
- Page 1 BK-UC003 Ver.1.0 Air Cylinder SLIT TYPE RODLESS CYLINDER ORV Series INSTRUCTION MANUAL Ver.1.0...
-
Page 2: General Precautions
Handling Instructions and Precautions General precautions Piping 1. Always thoroughly blow off (use compressed air) the tubing before connecting it to the rodless cylinder. Entering chips, sealing tape, rust, etc., generated during piping work could result in air leaks or other defective operation. 2. - Page 3 N [lbf] 3.2 [2.4] 0.5 [0.4] 0.5 [0.4] 20 [4.5] 20 [4.5] 20 [4.5] 40 [9.0] 40 [9.0] 20 [4.5] ORV16 ORV20 6.3 [4.6] 1.2 [0.9] 1.2 [0.9] 32 [7.2] 32 [7.2] 32 [7.2] 70 [15.7] 70 [15.7] 35 [7.9] 1.6 [1.2]...
- Page 4 Note that this is not the same as “average speed (cylinder stroke/time ORV20 required).” (See “Impact speed graph” to the lower right.) ORV16 Impact speed (mm/s) ●No shock absorber 1kg = 2.205lb.
- Page 5 (The graphs below show the → → displacement of the rubber bumper on one side.) ●ORV16, 20 → → F ' o ＋E E' ＝E' ＋E'...
- Page 6 2. Avoid any electric welding either during or after mounting the slit type rodless cylinders ORV series. Flows of welding cur- ●ORV16 ●ORV20 rent to the cylinder could generate arcs that result in damage （N） （N）...
- Page 7 Hexagon nut tightening torques Mounting the shock absorber, and stroke adjustment Width across flats Tightening torque Table mounting bolt Model mm [in.] N·m [ft·lbf] Table ORV16 8.0 [5.9] 13 [0.512] Shock absorber holder 8.0 [5.9] 14 [0.551] ORV20 Stopper ORV25 10.0 [7.4]...
-
Page 8: Specifications
SLIT TYPE RODLESS CYLINDERS SERIES Symbol Specifications Model ORV16 ORV20 ORV25 ORV32 ORV40 ORV50 Item 16 [0.630] 20 [0.787] 25 [0.984] 32 [1.260] 40 [1.575] 50 [1.969] Equivalent bore size mm [in.] Media Note1 Operation type Double acting type Operating pressure range MPa [psi.]... - Page 9 100, 200, 300, 400, 500, 600, 700, 800, 900, 1000, 1100, 1200 Remark: Non-standard strokes are available at 1mm pitch intervals. For strokes beyond the maximum available stroke, or for non-standard strokes, ask the nearest Koganei office. Consult us for delivery. Mass kg [lb.]...
-
Page 10: Additional Parts
F-ORV K-ORV Equivalent bore size Equivalent bore size 16 : For ORV16, 20 : For ORV20 16 : For ORV16, 20 : For ORV20 Equivalent bore size 25 : For ORV25, 32 : For ORV32 25 : For ORV25, 32 : For ORV32... - Page 11 Inner Construction Major Parts and Materials Name Material Quantity Remarks Name Material Quantity Remarks End cap R Polybutylene terephthalate End cap L Polybutylene terephthalate Cap cover Polypropylene Hexagon socket button head screw Alloy steel Zinc plated Cylinder barrel Aluminum alloy Band set pin Stainless steel Parallel pins...
- Page 12 Ｄ Ｃ 2-Ｙ Connection port Stroke Ｂ Ｂ A＋Stroke Note: For M-type mounts and F-type supports, see “Optional Parts Dimensions’” below. Code Model 20.5 ORV16 ORV20 26.5 ORV25 ORV32 11.5 11.5 ORV40 ORV50 Code Model M4×0.7 Depth 6 φ3.6 φ6.5 Counterbore, Depth 3.3 M5×0.8...
- Page 13 ORV50 Dimensions of Shock Absorber (mm) KSHJV ● Mounting thread size × Stroke (Stroke) Code Model M10×1.5 13.9 18.5 KSHJV10×10 (For ORV16) M12×1.5 16.2 10.5 KSHJV12×10 (For ORV20) M14×1.5 19.6 12.5 KSHJV14×12 (For ORV25) M18×1.5 24.2 15.0 KSHJV18×16 (For ORV32) M20×1.5...
-
Page 14: Sensor Switches
SENSOR SWITCHES Solid State Type, Reed Switch Type Symbol Order Codes -ORV Lead wire length A：1000mm [39in.] B：3000mm [118in.] Sensor switch model ZE155：Solid state type with indicator lamp DC4.5V∼28V Horizontal lead wire ZE135：Solid state type with indicator lamp DC10V∼28V Horizontal lead wire ZE102：Reed switch type with indicator lamp DC10V∼28V Horizontal lead wire ZE101：Reed switch type without indicator lamp DC5V∼28V Horizontal lead wire... - Page 15 Model the sensor switch at the end of the stroke. 56 [2.20] 15 [0.59] 28.5 [1.122] 31 [1.22] ORV16 68 [2.68] 17 [0.67] 38.5 [1.516] 41 [1.61] ORV20 ● (ZE101, ZE102) Reed switch type 76 [2.99]...
Need help?
Do you have a question about the ORV16 and is the answer not in the manual?
Questions and answers