Advertisement
Device Management (continued)
Setting up Autonomous Group Owner (AGO)
1
Step
Go to the Network Settings tab page, and set the
Autonomous Group Owner (AGO) feature to Enable or
Disable.
Enable: The receiver will become the group owner of the
session. The communication channel can be defined by the
receiver. And the Managed Meetings feature is available.
Disable: The communication channel will be consistent with
the source device, or be determined through negotiation
between the receiver and the connecting device. And the
Managed Meetings feature is not available.
2
Step
Click the "Apply" button to save your settings.
Advertisement
