Advertisement
channels in 10 channel steps: press the [F] key momentarily, then rotate the DIAL
selector knob. The "F" icon will show at the right edge of the display when the 10
channel step tuning mode is active. Press the [F] key once more to resume normal
channel selection in 1 channel steps.
Basic Scan
Basic Scan
Basic Scan
Basic Scan
The VXA-700 allows you to scan automatically in the VFO*
Memory, or Weather Channel*
to the station(s) on that frequency, if you like.
*1: In the VFO mode, the automatic scanner is only available in the current operating
band (AIR band, 2-m Amateur band, or FM BC band). Furthermore, on the AIR
band, the automatic scanner is only available in the COM band (118.000 - 136.975
MHz); when the scanner reaches the uppermost frequency in the COM band, it will
revert to the bottom end of the COM band and repeat the scanning process until
you cancel the scanning process.
*2: USA version only.
If you wish to scan in the NAV band (108.000 - 117.975 MHz), you can do so manually, as
described below.
Scanning operation is basically the same in each of the above modes.
Press the [SCAN(DW)MT] key momentarily to start the automatic scanner upward
(toward a higher frequency or a higher channel number).
When the scanner encounters a signal, scanning pauses and the radio remains on
that channel until one second after the signal disappears, after which scanning will
resume.
While the scanner remains paused on a frequency, the decimal point of the
frequency display blinks. The display will be illuminated unless the Scan Lamp
Feature is turned off.
To change the scan direction, turn the DIAL selector knob one click in the opposite
direction.
To stop the automatic scanner, press the PTT switch or the [SCAN(DW)MT] key
momentarily.
Scanning Operation
Scanning Operation
Scanning Operation
Scanning Operation
modes. It pauses on signals encountered, so you can talk
2
16
FCC ID: K66VXA-700
Operating Manual
1
, Main Memory, "Book"
Vertex Standard Co., Ltd.
Advertisement
