Creating a partnership
A f t e r c o m pletin g t h e Act iv e s y n c h installati o n a nd C o n t ents m a n a g er i n s t all a-
ti o n , set up a part n ership b e t w e e n yo ur N V M - 4 0 3 0 a nd y o u r c o m puter with the
help of the New Partnership setup wizard.
Once you've created a partnership, you will be able to synchronize contact
information using ActiveSync.
To create a partnership:
If you want to upload files into an SD/MMC card for use with your NVM-
4030, insert the card to the device.
Connect the device to your computer using the bundled USB cable.
• Plug the cable' s smaller connector to the USB port on the bottom panel
of the device.
• Plug the USB client connector into an available USB port on your com-
NVM-4030 Portable Navigation Device
The New Partnership setup wizard will automatically start on your computer
Follow the onscreen instructions.
When prompted to select the items to be synchronized, select only Con-
Click Finish on the Setup Complete dialog box.
The initial synchronization process will automatically begin when you finish
using the wizard. After the initial synchronization, information you've stored in
Microsoft Outlook Contacts on your computer will now be available on your
RNS-3200 without you having to manually input them on the device.
Disconnect your device from the computer and you're ready to go.
Now, once you have completed the first synchronization process, you can ini-
tiate synchronization from your device anytime, using the USB cable.
Chapter 4 Synchronizing with PC