Advertisement
Figure 2
the appliance and vent.
2.
If the vent exit is on top of the stove
(Figure 1):
A. Place the appliance according to the
manufacturer's instructions.
B. Drop a plumb bob to the center of the
appliance flue outlet and mark center point on
the ceiling (Figure 2). At your marked center
point, cut and frame a square hole in the
ceiling for installation of the Ceiling Support or
Firestop Spacer (Figure 3). Refer to Table 1
for the dimensions of the hole.
SECURE PELLET
COMPONENT
3" & 4" Ceiling Support /
fireStop SpaCer
3" & 4" Cathedral Ceiling
Support box
3" & 4" wall thimble
3" & 4" CaS wall thimble
3" & 4" wall thimble air
intake kit
Figure 3
FRAMING DIMENSIONS
7 ¼" x 7 ¼"
10 ¾" x 10 ¾"
7 ¼" x 7 ¼"
11" x 11"
Table 1
7
Advertisement
