Advertisement
SECURE PELLET
PIPE
Figure 10
3.
If the flue exits on back of stove and an
interior installation is desired (Figure 10):
A. Place the appliance according to the
manufacturer's instructions.
B. Connect the Tee Adapter or combine Tee
with Cleanout and Pipe Adapter then seal and
secure the Pipe Adapter to the back of the
stove.
C. Continue to assemble Pipe Sections as
described in Step 2.
4.
If the flue exit is on the back of stove, and
an exterior vertical installation or partial vertical
installation is desired (Figure 11):
10
Figure 11
A. Place the appliance according to
manufacturer's instructions.
B. Cut and frame a square opening in the
wall as specified in Table 1. Secure Pellet can
be installed with the standard Wall Thimble
or Wall Thimble Air Intake Kit for through the
wall installations. The Wall Thimble Air Intake
Kit allows combustion air to be drawn through
the framed Thimble opening, eliminating the
need to cut another opening in wall. The small
flex provided with this kit allows connection
to the Pellet Stove combustion air inlet. Note
that when installing the Wall Thimble Air
Intake Kit, the pipe will not be centered within
the framed opening. Loosely assemble both
halves of the Wall Thimble onto Pipe Section.
Connect the flexible hose with clamp to the
exterior half of the Wall Thimble. Guide the
flex through the opening in black interior half
of Wall Thimble, gently pull the flex towards
appliance (Figure 12), and if necessary trim
Advertisement
