Download  Print this page

Control - Philips CVR600 User Manual

Hide thumbs

Advertisement

Use the mobile detection
1
In video recording mode or photo capture
mode, tap [Setting] to access the system
menu.
2
to select [Mobile detection].
Tap
3
Tap [OK].
4
Tap
to select an option.
[Off]: Disable the mobile detection.
[On]: Enable the mobile detection. If
the real image does not change for
30 seconds, the driving recorder stops
recording automatically. When the
real image changes again, the driving
recorder starts recording automatically.
5
Tap [OK].
Display the date
1
In video recording mode or photo capture
mode, tap [Setting] to access the system
menu.
2
to select [Date print].
Tap
3
Tap [OK].
4
Tap
to select an option.
[Off]: Do not display the date on the
video image.
[On]: Display the date on the video
image.
5
Tap [OK].
Set the sensitivity of Gyro-sensor
When the Gyro-sensor is enabled and
triggered, the current video will be recorded
under the secure recording mode.
1
In video recording mode or photo capture
mode, tap [Setting] to access the system
menu.
2
to select [Sensitivity of
Tap
G-sensor].
3
Tap [OK].
4
Tap
to select an option.
EN
8
[High]/[Middle]/[Low]: Select a
sensitivity level.
[Off]: Disable the Gyro-sensor.
5
Tap [OK].
Mute the microphone
1
In video recording mode or photo capture
mode, tap [Setting] to access the system
menu.
2
to select [Voice record].
Tap
3
Tap [OK].
4
Tap
to select an option.
[Off]: Do not record voice during
video recording.
[On]: Record voice during video
recording.
5
Tap [OK].

Control

Use secure recording mode
During video recording, press the
tap the
icon.
is displayed.
»
» The current video is recorded under
the secure recording mode. It can be
deleted by formatting the microSD
card only.
Note
You can saved a maximum of 10 secure recording
videos.
button or

Advertisement

Table of Contents
loading

  Related Manuals for Philips CVR600