Table of Contents
Advertisement
Make sure to gain proper space between the product and devices that generate heat or exhaust air so that
the ambient temperature stays in the range specified in the installation environment requirement.
Do not install the product in other orientations such as horizontal or ceiling installation.
Figure 2.12. Horizontal installation
Recommended installation angle
Recommended installation angle is 0. Other angles may not satisfy the temperature specification
of the product.
Ambient temperature
The ambient temperature is decided from the multiple measurement points which are a 50mm-distance
from the case.
During the operation, adjust the air current to make certain that the temperatures measured in the points
stay within the specified temperature.
CAUTION
-
Note that although the ambient temperature is within the specified range, an operational
malfunction may occur if there is other device generating high heat; the radiation will influence the
product to increase its temperature.
-
Do not install this product into the fully-sealed space except the case in which the internal
temperature is adjustable by equipment such as air conditioner. Long-term usage might increase the
temperature and lead to malfunctions or other troubles.
-
When using the product in a high temperature environment, its life time will be shorten. Perform
the forced air cooling to counteract.
CPS-MG341G-ADSC1-930 Hardware Manual
Ceiling installation
2 Setup
19
Advertisement
Table of Contents
