Table of Contents
Advertisement
Quick Links
TH-601W Quick Guide
Warning: Before you use the device, make
Environment Support
3G/4G signal ≥75%
2.4GHz WiFi.
Upload bandwidth≥512KBit/s
1. Introduction
IR LED light
LENs
Speaker
CDS Sensor
Ring Button
Microphone
2. Install the App
Download the App '
mobile phone.
Special Notice: When open the app, you will receive a tip. Please click 'OK' to allow
the notifications, otherwise, you cannot receive any notification.
sure device is worked in below
environment, or it can't work properly.
Don't support
3G/4G signal ≤50%,
long delay or can't view video.
5GHz WiFi.
Device can't connect.
<512KBit/s or too many
computers/smartphones in the
same network.
Delay or can't work.
Tamper switch
Reset
Thread hole
' from 'Google Play Store' or 'App Store', and install on
DIY Smart
1 , User can connect device to 5
smartphones to in case 1-2 smartphones a r
e in poor signal area , other smartphones
can still ring and view.
2, User better to connect smartphone to
WiFi when there is WiFi available.
Change to use 2.4GHz WiFi.
1, Reduce the computers/smartphones
quantity connected in the same network.
2, Change to use a bigger bandwidth
network.
Antenna
Power in DC+(12V)(Red)
Power in DC-(12V)(Black)
Lock Relay COM(Yellow)
Lock Relay NO(Purple)
Doorbell Relay COM(Gray)
Doorbell Relay NO(White)
Orange&White)
Net RJ45(
Orange)
Net RJ45(
Green&White)
Net RJ45(
Green)
Net RJ45(
V170913-1
Solutions
Door phone
power supply (DC12V 500mA)
Lock
Lock Power
supply
Doorbell
Doorbell
Power supply
1
2
3
6
4
5
7
8
1
Advertisement
Table of Contents
Related Manuals for Gainwise TH-601W
Summary of Contents for Gainwise TH-601W
- Page 1 TH-601W Quick Guide V170913-1 Warning: Before you use the device, make sure device is worked in below environment, or it can't work properly. Environment Support Don't support Solutions 1 , User can connect device to 5 smartphones to in case 1-2 smartphones a r 3G/4G signal ≤50%,...
-
Page 2: Connect The Device
Android notice: notice: DIY Smart For the first time installation, please tap ‘OK’. Otherwise you can’t receive any notification. 3. Connect the Device Insert TF memory card and fix antenna, Step 1: connect power supply. It takes 30 seconds to start device. Special Notice: Do not connect the Antenna network cable, otherwise, the device... - Page 3 Set device’s wifi by scanning QR code. Wifi name Input your wifi password, then tap ‘Next’. Device will have 'Di.Di.Di.Di..' sound noticing user to scan Wifi QR code. Special Notice: If device have no 'Di.Di.Di.Di..' sound means the device has scanned before.
- Page 4 Step 4: Add device. In 'Device List', slide down to find device. 1. Slide down to refresh and find 3. Input your device. device name 4.Input your 2 .Click to add device password, device then tap ‘Save’. 4. Add device to another mobile phones. button in the ‘device list’...
-
Page 5: Date And Time
5. Date and Time In “Device List-Device Setting - ”, choose your Time Zone, and check if the new Time setting time is right or not. If time is right, press apply to get network time automatically. Remark: Time zone example: China UTC+8 Germany/France/Spain/Poland/Italy/Netherlands/Norway/Sweden UTC+1 UK/Portugal/Ireland UTC+0 Turkey/Romania/Finland UTC+2... -
Page 6: Video Record And Playback
Step 2: When people press the call button of the device or trigger the alarm, there will be a notification received on the mobile phone screen. For Android, press ‘check’ to view. For iPhone, slide and press ‘view’ or to view. Android Slide to view notice: User must keep the app running at phone's background, user can't... - Page 7 1.. Choose ‘Alarm Recording’ to record 2 . Choose t h e when visitor press recording time. ring button or sensors triggered. Step 2: Playback. In ‘Device list→Device→Playback', chose the video file to view playback. 9. Modify device’s password ‘Device List→ Setting→ Security Settings’, choose ‘Admin password’ to modify device’s password.
-
Page 8: Reset The Device
’ Tap ‘Admin password Input the old password and the new password, then tap ‘Save’. Tap ‘Security Setting’ 10. Reset the device Press and hold the reset button for 5 seconds and you will hear a voice of ‘KING’, wait 30 seconds to restart the device. - Page 9 Step 3: Set wifi. In ‘Device list→Device→Setting→Network settings’ Choose ‘WIFI’ to set device WIFI. Choose ‘WIFI’ Choose the WIFI Input WIFI password and tap ‘Ok’ 12. Mount on the Wall Notice: The wifi antenna should be installed inside the house to have better signal.
- Page 10 Step 1: Drill a hole for the wires to go through the wall, use the hexagonal screw driver in the box to remove the rain cover screw at the bottom of the device. Remove the rain cover sticker and stick the ring cover on the wall. Step 2: Fix the back housing on the wall with two screws Step 3: Lead the wires through the hole in the wall, and put the device into the back housing.
-
Page 11: Tamper Alarm
Door phone Antenna (DC12V 500mA) power supply Power in DC+(12V)(Red) Power in DC-(12V)(Black) Lock Lock Power supply Lock Relay COM(Yellow) Lock Relay NO(Purple) Doorbell Doorbell Doorbell Relay COM(Gray) ower supp Doorbell Relay NO(White) Orange&White) Net RJ45( Orange) RJ45( Green&White) Net RJ45( Green) Net RJ45( 13. - Page 12 Required ports: 1.5188 2.8000 3.969 4.51700 5.501 Q3. Why I can't receive push notification ring on my phone? A: 1, Make sure app's ‘Device->Settings->Alarm Settings->Receive alarm message ‘is enable. 2, Make sure the app is running at phone's background, and you haven't force stopped the app in phone's application manager.
- Page 13 Why can’t hear the voice clearly, picture delay, voice delay, halt or no sound. Possibly because network not good and stable. Choose the ‘LD’ mode to try or change a better A: 1, bandwidth network. A: 2, Possible there are too many other devices like computers on the same router, pls close these devices or change to a bigger band with network.
Need help?
Do you have a question about the TH-601W and is the answer not in the manual?
Questions and answers