Boston Scientific LATITUDE Patient Manual page 41

• Check that the switches on the bottom
of the Communicator are set correctly
for your country and if you need to dial
a number to get an outside line. Refer
to "Setting Switches for Your Country"
on page 51 and "Setting Switches
for PBX or Dial-out Numbers" on
page 52.
If using the LATITUDE Cellular Data
Plan:
• Move the Communicator to another
location that may provide a stronger
cellular signal.
• If other locations do not work after
trying another connection (see below),
try plugging the Communicator into an
active telephone wall jack.
To verify troubleshooting was
successful:
• Press and hold the Status button
until the Sending Waves light green
in sequence and repeat. If the
connection is successful, all three
Sending Waves will light green for 2
minutes.
LATITUDE
Communicator Patient Manual
®
39