Boston Scientific LATITUDE Patient Manual page 15

4. If you also want to use a telephone with this wall
jack, you may plug your telephone into the jack
labeled
5. Insert the AC adapter into the jack
labeled
6. Plug the AC adapter into an electrical outlet that is
easily accessible.
7. Make sure the LATITUDE Indicator on the front
of the Communicator is lit. The LATITUDE
Indicator flashes for up to one minute while the
Communicator starts up.
If the LATITUDE Indicator is not lit, check that both
ends of the AC adapter are plugged in firmly. Check
if the light on the AC adapter is on.
Important: Your Communicator should remain
connected to the electrical outlet and telephone wall
jack.
8. When electrical power is supplied, the
Communicator begins a startup process. The
Communicator lights all the indicators for
approximately one second to indicate all indicators
are working.
9. During the initial startup process, the Heart button
will flash with a white light. Press the flashing Heart
button, then wait until the Sending Waves light.
This is done to check if the Communicator can
interrogate your implanted device and send
your data to the LATITUDE system. Refer to the
.
.
LATITUDE
Communicator Patient Manual
®
13