Advertisement
Using Your Kambrook Arctic Tower Fan
3.
Thread the power cord through
the circle cord opening, once
the power cord is pulled through,
align the base stand with the
tower fan body being sure that
the power cord is situated to sit
on top of the groove found on
base stand piece (a). Press the
power cord into the cord clip to
secure it into place (See Fig. 3).
Cord
Clip
(a)
4. Fit the base stand on to the
stem located on the base of the
tower fan, using the 5 fastening
screws supplied, screw the base
stand to the tower fan body and
fasten until tightened (see Fig. 4).
5. Return the tower fan to its upright
position. It is now ready for use.
8
Cord
Grooves
(b)
Fig. 3
Fig. 4
WARNING: Do not operate
the tower fan without the
base stand fitted.
WARNING: Never insert
fingers, pencils or any
other objects through
the guards whenever the
power plug is connected,
in particular while the fan
is switched on.
NOTE: Ensure the power cord is not
caught or trapped between the
tower fan base and the floor flat
surface at all times.
continued
Advertisement
