Console Output Control Commands - Seiko SmartCS NS-2250 Command Reference Manual

6.4 Console output control commands

console
Function The output destination of a console message is controlled.
Format console [ { on | off } ]
Parameters [ { on | off } ]
Displays the status of system image.
The parameter "on" is set if this parameter is omitted.
on
off
Explanation This command is the same as the "console on" command.
The terminal where this command has been executed becomes an
output destination for console messages.
Stop the console message output to the terminal where this command is
executed.
console on
[Administrator]
6-38