Seiko SmartCS NS-2250 Command Reference Manual page 17

unset acct radius
server nas_id
unset acct tacacs
server addr
set terminal default
editing
set terminal default
height
set terminal default
width
set terminal default
Terminal
page
output object
set terminal default
prompt
set terminal default
redisp
set terminal default
timeout
Temperature set temperature
object adjust
Timezone
set timezone
object
Remove the NAS-ID attribute notified to the
RADIUS accounting server.
Remove the IP address of the TACACS+ server
(accounting).
Set the default setting for enabling or disabling
terminal line editing.
Set the default setting for the number of lines on
one page of the terminal.
Set the default setting for the number of characters
on one line of the terminal.
Set the default setting for enabling or disabling the
terminal paging function.
Set the default setting for the display format of the
terminal prompt.
Set whether or not to redisplay by default the
previously entered command string on the next
prompt screen after a command input error has
occurred.
Set the default value for the terminal automatic
logout time.
Set the temperature correction value of the
temperature sensor.
Set the time zone.
2-7