Seiko SmartCS NS-2250 Command Reference Manual page 203

show support
Function Command used to display support information.
Format show support [ { detail | file {write | info | delete }} ]
Parameters [ { detail | file {write | info | delete }} ]
detail
file {write | info | delete }
Execution example
(c)NS-2250# show support
===== start of show support =====
Fri Sep 25 20:49:55 JST 2015
===== Version information =====
System : System Software Ver x.x (Build xxxx-xx-xx)
Boot Status : Power on (xx:xx:xx)
System Up Time : 20xx/xx/xx xx:xx:xx
Local MAC Address : xx:xx:xx:xx:xx:xx
Number of MAC Address : 2
Model : NS-2250-xx (xx port)
Serial No. : xxxxxxxx
BootROM : Ver x.x
Main Board CPU : e500v2 (533.333328MHz)
Main Memory : 1025216 KBytes
Boot System : main (Ver x.x)
Boot Config : external startup1
Main System : Ver x.x
Backup System : Ver x.x
===== SYSTEM information =====
show timezone
Timezone is "Tokyo"
===== Host information =====
Hostname :NS-2250
IPaddress :192.0.2.1/24
TcpKeepAlive :180
: omitted
Displays more detailed information than with the "show support"
command and all the logs saved in the NS-2250.
write
Support information is saved as a file in RAM. The file which can be
saved is one. When a file exists already, it's overwritten.
When NS-2250 is restarted, a support information file is removed.
info
Display date and time when a support information file was saved.
This parameter also indicates a file size.
delete
Delete support information file in RAM.
↵
[Administrator]
5-9