Download Print this page

Rostra 250-8454 Installation Instructions Manual

Reverse camera input interface for general motors vehicles

Advertisement

Quick Links

Rostra
12-Volt Accessories
250-8454 Installation Instructions
Select GM Vehicles with 7" Screens
This manual shows a typical installation. Your vehicle may vary. Use
caution and if unsure seek professional assistance.
Vehicle Preparation
Before beginning your installation, familiarize yourself with the installation
instructions and the RearSight
To ensure your safety, (A) apply the emergency brake and
(B) read this entire manual before beginning.
CAUTION: Disconnect the negative battery cable at least 3 minutes
before beginning installation. This is advised to avoid unintended air
bag deployment or possible damage to vehicle computer components.
Damage to vehicle components is not covered by Rostra.
Components
Interface Module
Video Cable
Reverse Camera Input Interface
camera system components.
®
HDMI Cable
for General Motors Vehicles
Vehicle Connect
Cable
Mounting Tape
Camera Cable

Advertisement

loading

Summary of Contents for Rostra 250-8454

  • Page 1 CAUTION: Disconnect the negative battery cable at least 3 minutes before beginning installation. This is advised to avoid unintended air bag deployment or possible damage to vehicle computer components. Damage to vehicle components is not covered by Rostra. Components Camera Cable...
  • Page 2 1) Carefully remove the radio bezel by using a nylon pry tool. Use caution to not scratch the panel or dash. 2) Remove the four screws holding the control panel and A/C controls. Gently pull the panel away from the dashboard. © 2017 Rostra, Inc. 2519 Dana Dr. Laurinburg, NC 28352...
  • Page 3 Set the panel safely aside. 4) Locate the HMI module behind the control panel and disconnect the two leftmost connectors. 5) Insert the harnesses from the HMI module into the included t-harnesses. Insert the t-harness ends into the HMI module. www.rostra.com (800) 782-3379...
  • Page 4 7) Insert the LVDS t-harness and power/video harnesses into ® the RearSight Interface Control Module. 8) Temporarily reconnect the vehicle’s battery as well as the LCD/control panel. Turn the ignition key to the On position. BATTERY © 2017 Rostra, Inc. 2519 Dana Dr. Laurinburg, NC 28352...
  • Page 5: Camera Connections

    DO NOT connect the camera power leads to the turn signals or reverse lamps. The RearSight ® interface uses CAN technology to select the correct camera to display. www.rostra.com (800) 782-3379...
  • Page 6: Camera Settings

    - Front Cam. Triggered by Speed - Speed powers camera On/Off. - Right/Left Cam. Trigger by Turn Signals - Cameras On/Off with signal. - Cargo Icon Overlay In Reverse - Overlays cargo icon on-screen. © 2017 Rostra, Inc. 2519 Dana Dr. Laurinburg, NC 28352...
  • Page 7: Hdmi Cable

    LCD screen when connected. Installer Note: Please contact the manufacturer of your mobile device to determine if it is cable of HDMI output. Wiring Diagram Note: USB for Updates Only - No cable included. www.rostra.com (800) 782-3379...
  • Page 8 Rostra 12-Volt Accessories The leader in comfort, safety, and convenience. © 2017 Rostra, Inc. 2519 Dana Dr. Laurinburg, NC 28352...