Table of Contents
Advertisement
Sensors
en
Selecting/deselecting the
appliance automatic switch-
off
Touch œ again. The display for
"Automatic switch-off" of the appliance
é { lights up.
Touch N or M the function (on)- or
deselect (off).
Exit setting mode or:
Exiting setting mode
To exit and save the settings:
Wait for approx. 15 minutes or
■
Touch œ one last time or
■
Switch off the appliance. The
■
selected settings will take effect the
next time the washing machine is
switched on.
H
Sensors
A utomatic load sensing
S e n s o r s
The automatic load sensing function
adapts the water consumption ideally to
each programme depending on the
type of fabric and the load.
Unbalanced load detection
system
The automatic unbalanced load
detection system detects imbalances
and ensures even distribution of the
laundry by repeatedly starting and
stopping drum spinning.
If the laundry is extremely unevenly
distributed, the speed is reduced or the
spin cycle is not performed for safety
reasons.
Place large and small items of
Note:
laundry evenly in the drum. ~ Page 41
36
VoltCheck
depending on the model
The colon in the Finished in-time
display:
Flashes , if the voltage is currently
■
too low.
Pulses, if insufficient voltage was
■
detected during the programme.
Insufficient voltage may lead to
Note:
programme extensions and/or a non-
satisfactory spin result, for example.
2
Cleaning and
maintenance
:
Warning
C l e a n i n g a n d m a i n t e n a n c e
Danger of death!
There is a risk of electric shock if you
touch live components.
Switch off the appliance and pull out the
mains plug.
:
Warning
Risk of poisoning!
Toxic vapours can be produced by
cleaning agents that contain solvents,
e.g. cleaning solvent.
Do not use cleaning agents that contain
solvents.
Caution!
Damage to the appliance
Cleaning agents that contain solvents,
e.g. cleaning solvent, can damage
surfaces and components in the
machine.
Do not use cleaning agents that contain
solvents.
Advertisement
Table of Contents
