Hdd Replacement - FlyTech POS 554 User Manual

314.

HDD Replacement

To remove and replace the HDD, please follow the steps below.
1. Follow the steps at 3-2 to open the
cable cover at the back.
2. Loose the screw (x1) on HDD
holding bracket.
3. Pull the screw to slide bracket out
of the system.
4. Uninstall the HDD holding bracket.
2.
Slide to remove HDD from the
system and disconnect the HDD
cable.
6. Reverse Step 5 to replace the
hard drive disk.
7. As for installation, after connecting
HDD to the system, slide the
bracket reversely, engaging the
alignment pin. Finally fasten
the screw(x1) to complete
replacement.
9