DEVA Broadcast DB4000 Quick User Manual

Fm radio monitoring receiver

Table of Contents

Download this manual

65 Aleksandar Stamboliyski Str., 8000 Burgas, Bulgaria

Tel.: +359 56 820027, Fax: +359 56 836700

Email: office@devabroadcast.com, Web: www.devabroadcast.com

Quick User Guide

DB4000

FM Radio Monitoring Receiver

BEFORE YOU USE THIS PRODUCT

In order to be able to enjoy all the benefits of owning your new

DEVA product, please verify first that the latest software and

firmware release were installed.

Visit www.devabroadcast.com/downloads

for the most

recent software and firmware downloads, prior the installation.

DEVA Broadcast Limited is an ISO 9001:2008 certified company.

Table of Contents

Do you have a question about the DB4000 and is the answer not in the manual?

Page 1: Before You Use This Product
In order to be able to enjoy all the benefits of owning your new DEVA product, please verify first that the latest software and firmware release were installed. Visit www.devabroadcast.com/downloads for the most recent software and firmware downloads, prior the installation. DEVA Broadcast Limited is an ISO 9001:2008 certified company.
Page 2 This Quick user guide will make the installation of DB4000 - FM Radio Monitoring Receiver quick and easy. Applying these principles, you can simplify the process and save yourself extra time and effort. For more information about the Safety precautions and the Operating environment recommendations please refer to the User Manual.
Page 3 When these modes are activated, the DHCP server supports a record of past IP address assignments (bounded to DB4000's MAC address - refer to Step 3), so that it can preferentially assign to the device the same IP address that the client previously had. Please, if you are not familiar with the matter, consult with your network administrator about the appropriate settings and for further assistance.
Page 4 (Step 2.1); Mode defines the software behavior but it is uninfluential on DB4000 functions; IP Address Must be configured and taken from the Device (Step 2.2); Data Port is the main communication port used by the software (Step 2.3);...