Pilot - Vulcan-Hart LG300 Service Manual

Fig. 15
2. Note and disconnect thermopile to high limit
switch wiring.
Fig. 16
3. Loosen thermopile holding nut (1, Fig. 17).
F45691 (1117)
LG Series Fryer - REMOVAL AND REPLACEMENT OF PARTS
4. Remove thermopile from bracket.
5. Reverse to install.
All gas joints disturbed during servicing must be
checked for leaks. Check with a soap and water
solution (bubbles). Do not use an open flame.
1. Remove HEAT SHIELD.
2. Remove pilot assembly bracket.
Page 8 of 23
Fig. 17

PILOT

Shut off the gas before servicing the
unit and follow lockout / tagout
procedures.