Lexus IS250 2006 Owner's Manual page 287

Wipe the dipstick and reinsert it fully.
STEP 6
■
Adding engine oil
Make sure to check the oil type and prepare the items needed before
adding oil.
Oil grade
Items
Remove the oil filler cap.
STEP 1
Add engine oil slowly, checking the dipstick.
STEP 2
Install the filler cap, turning it clockwise.
STEP 3
It takes about 1.6 qt. (1.5 L, 1.3 lmp. qt.) to raise the oil level from low to full on the
dipstick.
ILSAC multi-grade engine oil
Clean funnel
4-3. Do-it-yourself maintenance
Low
Full
If the oil level is below or near the
low level mark, add engine oil of
the same type as already in the
engine.
4
269