The setting changes each time an operation is performed, as shown below. (When
changing the setting continuously, release the buttons, wait for at least 5 seconds,
and repeat step 2.)
Multi-information
display
Battery-saving function
■
In the following circumstances, the entry function is disabled in order to prevent the
vehicle and electronic key batteries from discharging.
When the entry function has not been used for 2 weeks or more
●
When the electronic key has been left within approximately 3 ft. (1 m) of the
●
vehicle for 10 minutes or more
The system will resume operation when...
The vehicle is locked using the door handle lock switch.
●
The vehicle is locked/unlocked using the wireless remote control function.
●
(P. 16)
The vehicle is locked/unlocked using the mechanical key. (P. 363)
●
1-2. Opening, closing and locking the doors and trunk
Unlocking doors
Hold the driver's door handle
to unlock only the driver's
door.
Hold the front passenger' s
door handle to unlock all
doors
Hold either front door handle
to unlock all doors
Beep
Exterior: Beeps three
times
Interior: Pings once
Exterior: Beeps twice
Interior: Pings once
1
9