Troubleshooting - Motorola F3124A User Manual

Troubleshooting

Problem
IMD does not
turn On
Battery does not
charge in IMD
Cradle
IMD does not
detect scan
input
22
Table 2: Troubleshooting the IMD
Cause
Battery is not
installed properly or
not charged
IMD in Suspend mode
IMD is not locked in
IMD Cradle
IMD Cradle contacts
are not clean
Battery temperature
is out of range
Bad battery
Aiming pattern not
directed to the bar-
code symbol
Unreadable barcode
Solution
Ensure proper battery installa-
tion in IMD.
Charge or replace the battery
Press the Power Button/Status
LED
Re-install IMD in IMD Cradle.
Place the IMD properly in IMD
Cradle. (Verify that the IMD Cra-
dle LED is On and charge for
three hours)
Clean contacts and remove dust
and objects from within the IMD
Cradle
Ensure that the battery tempera-
ture is within range. (refer to
"Charging the Battery" on
page 7)
Replace battery
Scan again and make sure that
the green light is aimed across
the barcode
Check for readable barcode (not
covered, or abstracted)
Be sure the barcode symbol is
not covered, damaged or
obstructed