3e-531AP Wireless Access Point
Performs Site Survey
Resets to factory default
Changes power level on Client device
(laptop)
Can turn Radio On/Off on laptop
Performs Rescan
Performs Self-test
You may need some or all of the following information handy as you
install the FIPS secure drivers on your wireless device's PC Card inter-
face:
•
The driver configuration utility login. The factory default is User-
name equal to "CryptoOfficer," and Userid equal to "CryptoFIPS;"
•
Type of encryption used by your WLAN (AES, 3DES, and wheth-
er you will be using Dynamic Key Exchange);
•
Your security certificate, key and Certificate Authority (CA), if us-
ing DKE;
•
Your Wireless SSID;
•
Your user name and password to access your network account on
the wireless device;
and, if addresses are to be statically assigned:
•
Your IP address;
•
Your Gateway address;
•
Your Subnet Mask.
Follow the instructions that came with your PC Card to complete the
installation. Once the configuration is complete, you should be able to ac-
ces the WLAN.
80
Chapter 6: PC Card Installation on a Laptop
û
P
û
P
P
P
P
P
P
P
P
P
29000125-001 C