Table of Contents
Advertisement
3e-531AP Wireless Access Point
Services Settings
DHCP Server
This page allows configuration of the DHCP server function accessible
from the Local LAN port. The default factory setting for the DHCP server
function is enabled. You can disable the DHCP server function, if you
wish. You can also set the range of addresses to be assigned.
Print Server
The print server function can be enabled or disabled. It is enabled by
default. If you do not plan to set up the print server function, you can
click disable and leave the metal plate on the printer port. The metal plate
is provided to protect that port from water.
26
Chapter 3: Access Point Configuration
29000125-001 C
Advertisement
Table of Contents
