Table of Contents
Advertisement
LMU-2x20™ Hardware and Installation Guide
Regulatory Information
Human Exposure Compliance Statement
Pursuant to 47 CFR § 24.52 of the FCC Rules and Regulations, personal communications
services (PCS) equipment is subject to the radio frequency radiation exposure requirements
specified in § 1.1307(b), § 2.1091 and § 2.1093, as appropriate.
CalAmp DataCom Inc. certifies that it has determined that the LMU-2x30™ complies with
the RF hazard requirements applicable to broadband PCS equipment operating under the
authority of 47 CFR Part 24, Subpart E of the FCC Rules and Regulations. This
determination is dependent upon installation, operation and use of the equipment in
accordance with all instructions provided.
The LMU-2x30™ is designed for and intended to be used in fixed and mobile applications.
"Fixed" means that the device is physically secured at one location and is not able to be
easily moved to another location. "Mobile" means that the device is designed to be used in
other than fixed locations and generally in such a way that a separation distance of at least 20
cm is normally maintained between the transmitter's antenna and the body of the user or
nearby persons. The LMU-2x30™ is not designed for or intended to be used in portable
applications (within 20 cm of the body of the user) and such uses are strictly prohibited.
To ensure that the LMU-2x30™ complies with current FCC regulations limiting both
maximum RF output power and human exposure to radio frequency radiation, a separation
distance of at least 20 cm must be maintained between the unit's antenna and the body of
the user and any nearby persons at all times and in all applications and uses. Additionally, in
mobile applications, maximum antenna gain must not exceed 3 dBi.
V1.0.10
December 12, 2010
Copyright ©CalAmp DataCom Inc 2010
CalAmp Proprietary & Confidential
- v -
Advertisement
Table of Contents
