Cal Amp LMU-2x30 Hardware And Installation Manual page 59

LMU-2x20™ Hardware and Installation Guide
o <mobile ID type>:
This will be the type of Mobile ID in use by the LMU. The available types are,
Off, ESN, IMEI, IMSI, USER, MIN and IP ADDRESS.
• INB:
o <inbound IP address>:
This is the current IP address in use by the LMU. This value should match the
IP address of your LM Direct™ server.
o <inbound port>:
This is the current UDP port the LMU will use to deliver its LM Direct™
data. This value should match UDP port you are using on your LM Direct™
server. It is typically 20500.
o <Inbound Protocol (LMD/LMX)>:
This is the current UDP/IP messaging protocol in use by the LMU. In general
it should be LMD.
Example GSM Response
APP:081 8.3d
COM:0
GPS:No Time Sync
INP:11100111 13.7V
MID:4141000100 ESN
INB:207.7.101.227:20500 LMD
V1.0.10
Copyright ©CalAmp DataCom Inc 2010
- 52 -
December 12, 2010
CalAmp Proprietary & Confidential