Error Messages - Roland D2 Service Notes

Jun. 2001

ERROR MESSAGES

Error Message List
Display
34
Meaning
There is a problem with the internal
system.
It is possible that the contents of user
memory have been lost.
A button held down since power-up
exists.
That operation cannot be performed
because the D2 is now playing back.
That operation cannot be performed
because the pattern has been mega-
mixed.
The data cannot be registered in a
RPS set (or MEGAMIX set) because
there are multiple un-muted parts.
There is no item to edit.
Playback is not possible because no
performance data has been recorded
in the pattern.
No further pattern recording is possi-
ble because the maximum number of
notes recordable in one pattern has
been exceeded.
No further song recording is possible
because the maximum number of pat-
terns recordable in one song has been
exceeded.
The pattern cannot be saved because
of insufficient user memory.
Action
Please contact your dealer or a nearby
Roland service center.
Please perform the Factory Reset op-
eration. If this does not resolve the
problem, contact your dealer or a
nearby Roland service center.
Be careful not to leave the buttons
held down (such as being caught be-
tween the panels).
Press [ ] to stop playback before
performing the operation.
Save the pattern, or re-select the pat-
tern.
Decide on one part of the phrase that
you wish to register, and mute all of
the remaining parts.
(This will be displayed if there is no
editable parameter when you press
[EDIT].)
Select a pattern that contains data.
Delete unwanted data from the pat-
tern being recorded.
Up to 50 patterns can be recorded in
one song. No more patterns than this
can be recorded.
Either initialize unwanted patterns,
or save the data on an external se-
quencer.
D2