Zone Control - Creative Sound Blaster User Manual

Zone Control

Your transmitter and receivers may automatically pair with each other the first time they are
switched on. However, to use zone control, you must manually pair your transmitter and
receivers so that the zones are correctly assigned. To do this, follow the steps in "Setting Up
Your Wireless System" on page 5.
Using Creative Music Server
1 Click the Wireless Control Setup
2 Under Zone, click the On option, then close the Wireless Settings window.
3 Select the zone to stream music to.
4 Select the song to stream, then click
5 Repeat steps 3 and 4 for streaming music to other zones.
R1
R2
R3
Transmitter
T
Receiver
R
TIP
Click the Standby
Using the Controller
1 Tap Settings -> Wireless Settings -> Modes and Zones.
2 Under Zone, tap ON. Then tap the zones you wish to enable wireless streaming to.
3 Tap Done when you have completed your selection.
4 Tap Yes to confirm the selection.
icon.
.
R4
T
icon on the zone to turn on/off wireless streaming to that zone.
Managing Broadcast and Zone modes 15