Step 2: Install Software; Step 3: Set Up The Transmitter - Creative Sound Blaster User Manual

Step 2: Install Software

To control your wireless music streaming and manage separate playlists for each zone, you
must install the drivers and applications provided on the installation CD. If you are using a
notebook that does not have a CD-ROM drive, you can download the installation software from
www.soundblaster.com/SBWirelessMultiPlay.
For all supported Windows OS
1 If prompted for the audio drivers, click the Cancel button.
2 Insert the Installation CD into your CD or DVD drive. Your CD should start automatically. If it
does not, follow the steps below:
i. Click Start -> My Computer.
ii. Right-click the CD or DVD drive icon, and then click Open Autoplay or Autoplay.
3 To complete the installation, follow the instructions on the screen.
4 When prompted, restart your computer.

Step 3: Set up the Transmitter

1 Click Start -> Programs or All Programs -> Creative -> Sound Blaster Wireless MultiPlay ->
Creative Music Server.
The first time you launch Creative Music Server, the Wireless Setup Wizard will run
automatically to guide you through setting up your transmitter and receivers. If not, click the
Wireless Control Setup
2 Select the Reset the transmitter for a
completely new setup option.
icon, then click the Wizard
Install Software 6
button.