Table of Contents
Advertisement
Cancelling the delay start
The countdown has not yet started
1. Press the Delay button repeatedly until the display shows the time of the washing pro-
gram.
• The phase indicators of the program come on.
2. Press the Start button, the washing program starts.
The countdown is operating
• Press the Delay button repeatedly until the display shows the time of the washing pro-
gram. The washing program starts.
WARNING!
Only interrupt or cancel a washing program if necessary.
Attention! Open the door carefully. Hot steam and water can escape.
Interrupting a washing program
• Open the appliance door. The washing program stops.
• Close the appliance door. The washing program continues from the point of interruption.
Cancelling the washing program
If the washing program has not started, you can change the selection.
To change the selection while the washing program operates, it is necessary to cancel the
program.
• Press and hold the Delay button and the Start button at the same time until:
– All the program indicators come on.
– The display shows two horizontal status bars.
Make sure that there is detergent in the detergent dispenser before you start a new wash-
ing program.
End of the washing program
When the washing program is completed, the display shows a zero and the end indicator is
on
1. Switch off the appliance.
2. Open the appliance door.
For better drying results, keep the appliance door ajar for some minutes.
Removing the load
• Let the dishes cool down before you remove them from the appliance. Hot dishes are
easily damaged.
• First remove items from the lower basket, then from the upper basket.
• There can be water on the sides and door of the appliance. Stainless steel becomes cool
more quickly than the dishes.
Setting and starting a washing program
17
Hide quick links:
Advertisement
Table of Contents
