Table of Contents
Advertisement
IMPORTANT NOTE: the list of printers and weighing scales supported by the GES3S increases
continuously. To know if your specific device is supported, please contact your Datamars sales
representative.
Turn-on your reader and press the Bluetooth key for 2 sec (on the bottom left-hand corner of
the keypad).
Choose SEARCH to start looking for Bluetooth devices in the surrounding. This may take up to
a few minutes.
Please note that early version of the Bluetooth module present on the GES3S was not
supporting Bluetooth Master mode and pressing the SEARCH button will display the following
message:
Warning: This function is not supported by the bluetooth module!!
In case such a message is displayed and you are interested in the Bluetooth Master
functionality please contact your Datamars Sales representative.
After a successful scan, the devices that are found are displayed as on the below screenshot.
As an example the following screenshot features a mobile printer and a TruTest XR3000
weighing scale.
Use the right arrow to choose which device you want to pair. Validate your choice with the
CONNECT button.
A successful pairing will display the following scree and the inside of the Bluetooth logo on the
top left hand corner will turn green, indicating that Bluetooth is ON and connected.
GES3S Manual – v. 1.9 March 2017
12/06/2013 12.30.10
DISABLE
SEARCH
12/06/2013 12.30.10
TIII Bluetooth Printer
001b3501fdc4
XR3000
00a0963644eb
SCAN
CONNECT
ENABLE
32
Advertisement
Table of Contents
