Table of Contents
Advertisement
3.3.5
Session
The Session menu allows you to manage the reading session files. A Reading Session is a file
stored in the SD card containing the answers to the related procedure file (questions).
The name of a reading session file is composed by the name of its procedure-file and the
creation-timestamp appended at the end.
After having selected the current procedure-file, the user can create a new reading session file
or can select an existing one. When a new reading session is created, it becomes automatically
the current reading session file.
3.3.5.1
Continue
The Continue feature is used to continue working with the current reading session file.
If no reading session file has been selected (i.e. when the reader has just been turned on), the
device prompts the following screen:
To create a new control file, please refer to instructions in the following chapter.
3.3.5.2
New
To select the current reading session file, select Reading Session in the Configuration menu,
then select New, the device displays the name of the current procedure file.
If the current file is the right one, press OK, otherwise:
1. To change the procedure file, press MODIFY.
2. Chose the desired procedure file from the list, than press SEL.LINE.
3. Press OK to confirm the selected procedure.
1.
GES3S Manual – v. 1.9 March 2017
2.
3.
14
Advertisement
Table of Contents
