Table of Contents
Advertisement
Choose 'ENABLE'. Your GES3S is now discoverable and will be found if you launch a Bluetooth
scan from your computer. For more information regarding how to perform a Bluetooth scan and
pairing from your computer, please refer to Operating System manual.
IMPORTANT NOTE: GES3S Bluetooth passkey or pairing code is 0 (zero)
Once your GES3S and your computer have been successfully paired, you can use a tool like
Hyperterminal to visualize the data sent by the GES3S to the computer. Alternatively you can
also use the dashboard functionality of Rumisoft as displayed below:
4.2.2
Bluetooth Master.
We recommend using this mode when the GES3S needs to be connected to a printer, to a
weighing scale or to any device that can be connected as a Bluetooth SPP slave device.
GES3S Manual – v. 1.9 March 2017
12/06/2013 12.30.10
DISABLE
SEARCH
This snapshot shows which data is sent via Bluetooth with the 2 parameters
CONFIGURATION/Send Version and CONFIGURATION/Send Reading at ON
ENABLE
Once pairing has been done you need to
pick-up the right COM port on your
computer and set the Baud rate to 115'200
bps to establish a data connection
31
Advertisement
Table of Contents
