English
14
Usage frequency
Normal
Heavy
Cleaning the milk carafe
Carafe quick clean
You can select the QUICK CLEAN function via the menu as described in the steps below:
1 Press the MENU button and select QUICK CLEAN, press the OK button to confirm.
2 Make sure that the milk carafe is installed and the milk froth dispensing spout is open.
3 Place the container under the milk froth dispensing spout.
Note: Make sure the milk dispensing spout is pulled out.
4 Press the OK button to start dispensing hot water.
Thorough cleaning of the milk carafe
To clean the milk carafe thoroughly, you have to do the following regularly:
1 Remove the lid of the milk dispensing unit.
2 Lift the milk dispensing spout out of the milk dispensing unit and remove the milk tube from the
milk dispensing spout (Fig. 31).
3 Remove the milk tube from the milk dispensing spout.
4 Rinse the milk tube and milk dispensing spout with lukewarm water thoroughly.
Weekly cleaning of the milk carafe
The milk dispensing spout consists of 5 components. Disassemble all components once a week and
clean them under the tap. You can also clean all components, except for the milk container, in the
dishwasher.
1
2
3
4
5
1
Milk tube
2 Rubber support
3 Milk frother
4 Milk frother connector
5 Housing of milk dispensing spout
Disassembling the milk dispensing spout
1 Press the release buttons on both sides of the top of the milk dispensing unit (1) and lift the top off
the milk container (2) (Fig. 32).
Nr of drinks brewed daily
6-10
>10
Lubrication frequency
Every 2 months
Every month