Registering Another Mobile Device - Panasonic KX-HNC805C Installation Manual

Registering
another mobile
device
Do not perform this procedure if
you want to integrate the
camera with your Home
Network System. Use the
procedure found in the System
Setup Guide included with your
hub.
In order to access the camera
from a mobile device, you must
first register the mobile device to
the camera. You can register up to
8 mobile devices to a camera.
Confirm the following before you
begin.
– Make sure you have completed
the initial setup procedure
– Make sure your mobile device
can connect to the Internet
– Make sure your wireless router
and the camera are turned on
– Make sure your mobile device
and the camera are connected
to the same wireless router
1
Using the mobile device that
you want to register,
download the [Home
Network] app and then start
the app.
For assistance, visit www.panasonic.ca/english/support
HNC805C_(en-en)_0420_shinsei.pdf 21
2
Tap [Add This Mobile
Device].
3
When prompted, press the
MWi-Fi SETUPN button on the
camera.
R Your mobile device will be
registered to the camera.
4
When prompted, follow the
on-screen instructions and
enter the password used to
log in to the camera while
away from home.
5
When prompted, enter a
name for your mobile device
and then tap [OK].
R This setting allows you to
change the name assigned
to your device. It can help
you identify your mobile
device when performing
certain operations, such as
deregistering a mobile
device.
R The app's home screen is
displayed when initial setup
is complete.
Setup
21
2016/04/20 16:55:32