t.a.c. TAC Xenta 511 Handbook page 30

TAC Xenta 511 and 911 Handbook
3.5 System Program Update
28 (32), 0-004-7870-0 (EN)
System Info
• sysinfo: General system information. (This will be needed if
consulting the TAC Solution Team.
System error log
• err: Display error log with the 10 most recent errors
• err select: Filter and search error log
• err file: Display an error log listing an extended period
Diagnostics
• ps: Process profile, displaying processes currently running
The TAC Xenta 911 system program can be updated via the IP network
if you run an installation program on the PC (see figure below). The in-
stallation program is distributed by TAC.
LAN
10 Mbps patch
UTP or STP cable
Connecting the TAC Xenta 911 to a Local Area Network
1 Connect the TAC Xenta 911 to a LAN according to the figure.
2 Connect the PC to the same network and start the installation pro-
gram TAC Xenta911_nnnn.exe (obtained via TARAI or on a
TAC Vista IV CD).
3 Type root, password, the 911 IP address and follow the instructions
on the screen.
MMC
A RS232 B 10Base-T
TAC AB, 16 May 2003
3 TAC Xenta 911