Safety Symbols
The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all
instructions on the machine before attempting to assemble and operate.
Symbols
READ THE OPERATOR'S
MANUAL(S) – Read, understand
and follow all instructions in the
user manual(s) before attempting
to assemble and operate.
Keep bystanders and children
a safe distance away.
RISK OF FIRE OR EXPLOSION.
Do not spray a flammable or
combustible liquid or paint near
sparks, flames, pilot lights or in a
confined area. The spray area must
be well-ventilated. Keep compressor
at least 20' (6 m) away from spray
area. Never smoke when spraying.
RISK OF PERSONAL INJURY.
Never spray compressed air or
material at self or others.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Descriptions
5
Symbols
Descriptions
SAFETY ALERT – Indicates a
precaution, a warning or a danger.
WARNING! Do not expose the unit
to rain or wet conditions.
RISK OF BURSTING. Make sure
the regulator is adjusted so that the
compressor outlet pressure is set
lower than the maximum operating
pressure of the spray gun or tool.
Before starting the compressor, pull
the ring on the safety valve to make
sure the valve moves freely. Drain
water from tank after each use. Do not
weld or repair tank.
RISK OF BURNS. Do not touch the
pump, the manifold or the transfer
tube while the compressor is running.
Allow the parts to cool down before
handling or servicing.
Indoor use only. Only use battery
charger indoors.
Need help?
Do you have a question about the iONAIR and is the answer not in the manual?