Safety Protection; Remote Controller - Pelonis NTH15-17MR Owner's Manual

memory function
Machine after normal shutdown, restart, will be in accordance with the recent
shutdown before the state run.
Power off, once again, in accordance with the factory default values. high gear
start. Set temperature by default to 95°F.
Off screen function
Machine in the working state, 1 minutes without operation, the screen
automatically goes out, only to keep the heating logo lit. While holding the "+"
and "-" button for 2 seconds, you can turn off the screen function, once again
hold the "+" and "-" button for 2 seconds, turn off the screen function.
Temperature sensor short circuit, open circuit protection
function
No matter in what mode, the temperature sensor appears short circuit
protection, digital screen display room temperature digital tube display E1 or E2
and constantly flicker, any key operation is invalid. The buzzer ringing 10 times.

Safety protection

In the start state, when the room temperature TH is above 122 °F, close all
outputs system, The digital screen displays "FF" and flashes 1 times per
second at a frequency of 75 times, press any key will not work, only the power
down to exit the protection.
ECO energy saving function
Select the ECO energy saving gear, electric heater according to the ambient
temperature and the temperature setting of the machine to do comparison,
select the appropriate gear operation to achieve the purpose of saving energy.

Remote controller

Use of the remote controller: the key functions are basically the same as the
body operation panel.
5