Model 965 Five-Station Battery Charger - Teledyne 913 Installation And Operation Manual

Isco 910 series 920 series 930 series 940 series 960 series
Table of Contents

Advertisement

Power Products Guide
Section 4 Isco Battery Chargers and Power Packs
4.6 Model 965
Five-Station Battery
Charger
Figure 4-5 Model 965 Five-Station Battery Charger
4-5
The Five-Station Battery Charger provides a convenient way to
charge several Isco batteries at a time. It also provides the proper
charging conditions for either type of battery: nickel-cadmium or
lead-acid. Switches select operation from either 120 volts or 240
volts and charging for nickel-cadmium or lead-acid batteries.
This charger is listed by UL. This unit replaces a previous model
that was designed only for charging nickel-cadmium batteries.
You can charge as many as five batteries of either type
(nickel-cadmium or lead-acid) at the same time with the Model
965. To charge either type of battery, simply attach the battery's
connector to one of the output connectors on the charger. Make
certain the selector switch is appropriate for the battery you are
charging before applying power.
Generally the batteries (either type) will attain full charge
within 15 to 18 hours. Occasional or slight overcharging of the
batteries will not hurt them, but Teledyne Isco recommends that
you avoid frequent or prolonged overcharging. Each Five-Station
Battery Charger comes with its own manual. Operating instruc-
tions are provided in this manual, as well as other information,
so it is not repeated here.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

914923946948961947 ... Show all

Table of Contents