Section 4 Isco Battery Chargers And Power Packs; Isco Chargers And Power Packs; Model 961 Battery Charger; Model 961 Wall Charger For Nickel-Cadmium Batteries - Teledyne 913 Installation And Operation Manual

Power Products Guide

Section 4 Isco Battery Chargers and Power Packs

4.1 Isco Chargers and
Power Packs
4.2 Model 961 Battery
Charger
Figure 4-1 Model 961 Wall Charger for Nickel-Cadmium
Batteries
4-1
Teledyne Isco offers several battery chargers and two different
power packs for use with all Isco products. You can use the power
packs instead of the nickel-cadmium or lead-acid batteries to
power the samplers, flow meters, or other equipment.
The power packs are made for operation from either nominal 120
VAC, 60 Hz (USA) or 220-240 VAC, 50 Hz (Europe and much of
the rest of the world) power sources. The 120-volt models are
supplied with the three-prong cord commonly used in the USA
and Canada. The 220-240-volt models are supplied with the most
common two-prong plug used in Europe.
The simplest charger is a wall plug-in transformer type, Model
961, intended for charging the Model 934 Nickel-Cadmium
Battery. This charger provides the proper charging current
(400 mA) for the nickel-cadmium battery. Only one version,
powered from 120 VAC, is available.