Programming A Test Voltage - Fluke 1550B User Manual

1550B
Users Manual

Programming a Test Voltage

To set a test voltage in between the pre-set test voltages proceed as follows:
1. With the Meter turned on, press the
M
00k
0
V
2. Press the
(250 V, 500 V, 1000 V, 2500 V, and 5000 V). Select the voltage closest to
the level required.
The selected test voltage appears in the upper-right of the display.
e
3. Press the
display.
V
4. Press the
the correct voltage level shows, do not press the
return the test voltage to the next lowest last pre-set voltage selection.
Instead press the
The test voltage can be up to 10 % higher than the test voltage you
select.
12
V
00M G
0M
d
or button to scroll through the pre-set test voltage options
button. TV=xxxxV appears flashing in the lower-left of the
d
and buttons to increment and decrement the voltage. When
H
button to go to the next function.
H
button to select TEST VOLTAGE.
500V
0G
00G
T
G T
k M
Note
Test Voltage Display
e
button. Doing so will
ASW05F.EPS